<span id="k6bam"><ruby id="k6bam"></ruby></span>
  • <tbody id="k6bam"></tbody>
    <track id="k6bam"><span id="k6bam"></span></track>

    1. <menuitem id="k6bam"></menuitem>
        <nobr id="k6bam"></nobr>

      1. 沈陽百坦科技儀器廠

        數控伺服控制卷繞機

        張力計廠家 2018-01-24


          特點及應用| Characteristics and Application
          卷繞機主要用于鋁膜窄帶分條卷繞等生產領域使用。本機器具有高速、直筒錐邊均可,起點可設,終點可設,幅寬可調,排繞間距可調,張力可調,恒速恒張力控制,程序可儲存,參數集中控制,絲筒成形好。張力恒定,能耗低等特點,適用于各種帶狀物等。
          技術參數:
          卷繞機繞絲線速度:0-150m/min
          卷筒最大直徑:82.5-200mm
          電源:AC220V  50HZ/60HZ
          電機功率:伺服電機:750W
          電動機:120W
          電機轉速:伺服電機:3000 r/min
          電動機:1400r/min
          連接電纜2×2.5   R.S.J.MP
          卷繞筒管尺寸:內徑×外徑×長度(mm)76×82.5×180(無論內徑和長度均可以在有限范圍內為您定做)
          往復行程:0/160(標準)
          單錠面板尺寸:寬×高(mm)477×330
          The winding machine is mainly used in the production field of the aluminum film narrowband strip winding.This machine has high speed, straight cone edge, can set a starting point, end point can be set, the width is adjustable, around distance is adjustable, adjustable tension, constant speed, constant tension control program can be stored, centralized control parameters, silk tube forming.Constant tension, low energy consumption, etc
          Technical parameters:
          Winding speed:0-150m/min
          The maximum diameter of the drum:82.5-200mm
          Power:AC220V  50HZ/60HZ
          Motor power:Servo motor:750w
          Motor:120w
          Motor speed:Servo motor:3000 r/min
          Motor:1400r/min
          Connect the cable:2X2.5   R.S.J.MP
          Winding bobbin size:Inside diameter x Outside diameter x length(mm)38x41x230(The inner diameter and length have different requirements can be customized in the range)
          Reciprocating stroke:0/160
          Single spindle size:475mm×330mm

        聯系百坦 咨詢熱線
        ,狠色婷婷久久国产AV,国国内精品伊人久久久久妇,久久狠狠艹视频,九九精品一区二区三区毛片
        <span id="k6bam"><ruby id="k6bam"></ruby></span>
      2. <tbody id="k6bam"></tbody>
        <track id="k6bam"><span id="k6bam"></span></track>

        1. <menuitem id="k6bam"></menuitem>
            <nobr id="k6bam"></nobr>